Trailer Tech Confidence on the 2026 Ram 2500 for Independence, MO Drivers

You're cruising down I-470 when a little symbol you've never noticed before lights up on the dash. Is it serious? Can you keep driving? Do you need to pull over right now, or can it wait until the weekend? Every Jeep owner has had that moment, and the answer isn't always obvious when you're looking at a tiny orange icon at 65 mph. The short answer Start with the color. Red means stop safely and check the problem now. Yellow or amber means something needs attention soon, but you can usually keep driving carefully. Green, white and blue lights simply tell you a system is on. A flashing light is almost always more urgent than the same light glowing steadily. In this guide, we'll walk through the warning lights and indicators you're most likely to see on a Jeep Wrangler, Gladiator, Grand Cherokee, Compass, Cherokee or Wagoneer, what each one means and exactly what to do next. We've based it on the official Jeep and Stellantis owner's manuals, plus what our service team in Lee's Summit sees in the shop every week. Keep it bookmarked, or better yet, use it alongside the owner's manual in your glove box, since every model and trim has a few symbols of its own. Start With the Color: What Each Light Color Means Jeep groups its dashboard symbols by color, and the color is the fastest way to judge how urgent a light is. Jeep's owner's manuals sort them into red warning lights, yellow warning lights and indicator lights in yellow, green, white and blue. Color What it means What to do Red A safety issue or a problem that can damage the vehicle Pull over when it's safe and check it now. Some red lights mean you shouldn't keep driving. Yellow or amber A system needs attention or has a fault Keep driving carefully and schedule service soon. Green A system is on and working Nothing. It's information only. White A system is ready or available Nothing. It's information only. Blue High beams are on Dim them for oncoming traffic. One important exception: on Jeep 4x4 models, some yellow lights are simply indicators. The 4WD, 4WD Low and sway bar disconnect lights on a Wrangler, for example, are yellow because they're reminding you that an off-road system is engaged, not because something is wrong. We'll cover those below. Why every light comes on when you start your Jeep When you turn the ignition on, many warning lights light up for a few seconds and then go out. That's a self-check, and it's normal. It's actually a problem if a light like the check engine, airbag or ABS light does not come on during startup, because that can mean the warning system itself isn't working. Jeep's manuals recommend having it inspected if that happens. Red Warning Lights: Stop Safely and Check Now Red lights are the ones you shouldn't ignore. Some, like the seat belt or door open light, are easy to fix on the spot. Others mean continuing to drive could damage the engine or transmission or affect your safety. Oil pressure warning light Looks like: an old-fashioned oil can with a drip. This light means the engine's oil pressure is low. It's one of the most serious lights on the dash. Jeep's manuals say to pull over and shut off the engine as soon as it's safe, and not to drive the vehicle until the problem is fixed. The light doesn't tell you how much oil is in the engine, so check the level with the dipstick or the vehicle information display once the engine is off. Even if the oil level looks fine, have the vehicle towed or inspected before driving it again. Low oil pressure can destroy an engine in a very short time. Don't confuse this light with the "Oil Change Required" message, which is just a maintenance reminder. Our guide on how long you can drive with an overdue oil change explains the difference. Engine coolant temperature warning light Looks like: a thermometer sitting in wavy lines of liquid. Your engine is overheating. You'll usually hear a chime, too. According to Jeep's manuals, pull over safely, turn off the air conditioning, shift into Neutral and let the engine idle so the temperature can come down. If it doesn't return to normal, shut the engine off and call for service. Never open the radiator or coolant reservoir cap on a hot engine; the coolant is under pressure and can cause serious burns. Overheating is most common in summer stop-and-go traffic, when towing or after a coolant leak. If you also see a yellow low coolant level light, the cause may be as simple as low coolant, but it still needs to be checked for a leak. Oil temperature warning light Looks like: an oil can with a thermometer. The engine oil is running hotter than it should. This is more likely when you're towing, crawling slowly off-road on a hot day or climbing long grades. Pull over safely, turn off the engine and let the oil cool before continuing. If it happens repeatedly, have the cooling and lubrication systems checked. Transmission temperature warning light Looks like: a gear with a thermometer in the middle. The transmission fluid is too hot, which often happens with heavy towing or long, slow off-road climbs. Jeep's manuals say to pull over, put the vehicle in Park or Neutral and let the engine idle until the light goes out, then you can continue. Don't keep driving with this light on: overheated fluid can boil over onto hot engine or exhaust parts and create a fire risk, and it will eventually cause serious transmission damage. Battery charge warning light Looks like: a car battery with plus and minus signs. The battery isn't being charged properly. That usually points to a problem with the alternator, a belt or the charging system's wiring. When this light is on, your Jeep is running on battery power alone, and it may stall once the battery runs down. Turn off nonessential electrical items like heated seats and the radio, and head straight to a service department. Don't plan on making a long trip first. Brake warning light Looks like: an exclamation point inside a circle with brackets on each side, sometimes with the word "BRAKE." This light has a few possible meanings: The parking brake is set. Release it and the light should go out. The brake fluid is low, which usually means there's a leak in the brake system. There's a hydraulic or brake booster fault. You may feel the pedal pulse or hear the ABS pump run. If the brake light and the ABS light come on together, the system that balances braking front to rear may have failed. If the light stays on after you release the parking brake, Jeep's manuals are blunt: driving with the red brake light on is dangerous, and stopping distances can be longer. Have the vehicle checked right away, and tow it if the brake pedal feels soft or low. Air bag warning light Looks like: a seated person with a large circle in front of them. The air bag system has a fault, which means an air bag may not deploy correctly in a crash. The light normally comes on for a few seconds at startup as a self-check. If it stays on, comes on while driving or doesn't light up at all during startup, have the system inspected as soon as possible. Electronic Throttle Control (ETC) warning light Looks like: a lightning bolt between two brackets. This one is especially common on Jeep, Ram, Dodge and Chrysler vehicles. It means the electronic throttle system, which controls how the engine responds to the gas pedal, has detected a problem. Steady: the vehicle is usually still drivable. Stop safely, put the vehicle in Park and turn the ignition off and back on. If the light goes out, you're fine. If it stays on, schedule service soon. Flashing: a more serious problem. You may notice reduced power, a rough or high idle or stalling. Get service immediately; the vehicle may need to be towed. The light can also come on briefly if you press the gas and brake pedals at the same time. Power steering warning light Looks like: a steering wheel with an exclamation point. There's a problem with the power steering system. Steering may take noticeably more effort, especially at low speeds and in parking lots. Drive carefully to a service department and avoid tight maneuvering until it's fixed. Other red lights Seat belt reminder: the driver or a front passenger isn't buckled. Buckle up. Door, hood or swing gate open: something isn't fully latched. Stop and close it before driving further, especially the hood. Vehicle security: on equipped models, this flashes when the security system is armed, which is normal. If it stays on while driving, the security system may have a fault. Yellow Warning Lights: Get It Checked Soon Yellow warning lights don't usually mean you need to pull over immediately, but they do mean something isn't working the way it should. Ignoring them can turn a small repair into a bigger one. Check engine light Looks like: the outline of an engine. Officially called the Malfunction Indicator Light, this is part of your Jeep's onboard diagnostic system, which monitors the engine and emissions controls. The way it lights up tells you a lot: Steady: a problem has been detected. Sometimes it's minor, like a loose gas cap or poor-quality fuel. Your Jeep will usually drive normally, but if the light stays on after several drives, schedule service. Driving for a long time with the light on can affect fuel economy and other systems. Flashing: a serious problem, often an engine misfire, that can cause sudden power loss or severe catalytic converter damage. Reduce speed and get service as soon as possible. Jeep's manuals also warn not to park over dry grass, leaves or other flammable material, because an overheated catalytic converter can start a fire. Some Jeeps also have a separate loose fuel filler cap light. If you see it, tighten the gas cap until it's secure. If the light doesn't go off after that, have it checked. Tire pressure warning light (TPMS) Looks like: a horseshoe-shaped tire cross-section with an exclamation point inside. Steady: one or more tires are below the recommended pressure. Check all four tires and fill them to the pressure listed on the label inside the driver's door, not the maximum number printed on the tire. Flashing for about a minute, then steady: the tire pressure monitoring system itself has a fault, so it may not warn you if a tire gets low. Have it checked. This is the light Kansas City drivers see most often on the first cold morning of fall. As a rule of thumb, tire pressure drops about 1 to 2 PSI for every 10-degree drop in air temperature, so a tire that was fine on a 70-degree afternoon can trigger the light at 30 degrees the next morning. Check pressures when the tires are cold, before you've driven far. And never keep driving on a flat or badly underinflated tire, since handling can be affected. ABS warning light Looks like: the letters "ABS" inside a circle. The anti-lock brake system has a fault. Your regular brakes should still work as long as the red brake warning light is off, but the anti-lock function won't, which matters most on wet or icy roads. Schedule service as soon as possible and leave extra stopping distance until then. Electronic Stability Control (ESC) lights ESC active, which looks like a vehicle with two wavy lines behind it: when this comes on while you're driving, the stability system is working to keep you from skidding. You may hear clicking or buzzing, which is normal. Ease off the gas and drive for the conditions. If the light stays on all the time, the system may have a fault and should be checked. ESC off, which is the same symbol with the word "OFF": stability control has been partially or fully turned off. Some off-road situations call for that, such as rocking out of deep snow or mud, but turn it back on when you're back on pavement. Service 4WD light The four-wheel-drive system has detected a problem and isn't working correctly. Avoid off-road driving and get it inspected promptly. On Wrangler and Gladiator models, make sure you've completed any shift between 2H, 4H and 4L fully. Follow the shifting steps in your owner's manual, since an incomplete shift can also trigger a message. Low coolant level light The coolant is below the proper level. Once the engine is completely cool, check the coolant reservoir and top it off with the coolant type listed in your owner's manual. Coolant doesn't usually disappear on its own, so have the system checked for leaks, especially before towing or a long trip. Other yellow warning lights Low fuel: time to fill up. Low washer fluid: refill the windshield washer reservoir. In winter, use a fluid rated for freezing temperatures. Service Forward Collision Warning: the forward collision system has a fault. A dirty windshield, snow or mud over the front sensor can sometimes cause it. Clean the area, and if the light stays on, have it checked. Service Stop/Start: the automatic engine stop/start system needs attention. The engine will still run normally. Sway bar fault (Rubicon models): the electronic sway bar disconnect isn't working correctly. Have it inspected before your next trail day. Air suspension fault (Grand Cherokee and Wagoneer with Quadra-Lift): the air suspension has detected a problem. Avoid changing ride height and have it checked. Cruise control or adaptive cruise control fault: cruise control won't work until the problem is fixed. Indicator Lights: Systems Doing Their Job These lights don't mean anything is wrong. They're telling you a feature is on, ready or engaged. Four-wheel-drive and off-road indicators 4WD, 4WD Part Time and 4WD Low (yellow on Wrangler and Gladiator): show which transfer case mode you're in. They're yellow as a reminder, since part-time 4WD isn't meant for dry pavement. 4WD Auto (green): the full-time four-wheel-drive mode is engaged. Sway bar (yellow, Rubicon): the front sway bar is disconnected for more wheel travel off-road. Reconnect it before driving at higher speeds on pavement. Axle lock (yellow): the rear or front and rear lockers are engaged. Unlock them for normal driving and turning on pavement. Hill Descent Control and Selec-Speed Control (white): the low-speed descent or crawl control is ready or working. Everyday indicators Stop/Start active (green): the engine has shut off at a stop to save fuel and will restart when you lift off the brake. Cruise control (white when ready, green when set): shows cruise control status. Forward Collision Warning off (yellow): the system has been turned off. You can turn it back on in the Uconnect settings. Headlights, fog lights and turn signals (green): these lights are on. High beams (blue): your high beams are on. Messages That Aren't Warning Lights Newer Jeeps also show text messages in the instrument cluster display. A few common ones: "Oil Change Required": the oil life monitor has reached 0%. It's a maintenance reminder, not an emergency. Schedule an oil change soon, and remember the monitor needs to be reset afterward. We have a guide for resetting the oil change light on a 2026 Jeep Compass. Tire pressure readings: many models show each tire's pressure, which makes it easy to see which one is low. Driving a Wrangler? Our Jeep Wrangler dashboard warning lights guide covers Wrangler-specific details. What to Do When a Warning Light Comes On Check the color and whether it's flashing. Red or flashing means act now; yellow and steady means schedule service soon. Notice how the Jeep feels. Unusual noises, smells, smoke, a soft brake pedal, overheating or a loss of power all raise the urgency. Pull over safely if it's red. Get completely off the road before checking anything under the hood. Read the message in the cluster. Many lights come with a text message that explains the issue more clearly. Look it up in your owner's manual. Every model has a few unique symbols, and the manual lists them all. Call your service department. If you're unsure whether it's safe to drive, ask. It's better to tow a vehicle a few miles than to replace an engine. Frequently Asked Questions Can I drive my Jeep with the check engine light on? If the light is steady and your Jeep drives normally, you can usually drive it for a short time, but schedule service soon. If the light is flashing, reduce speed and get service as soon as possible, because a severe misfire can damage the catalytic converter. What does the lightning bolt light mean on a Jeep? The lightning bolt between two brackets is the Electronic Throttle Control light. If it's steady, stop safely, put the vehicle in Park and restart it; if it stays on, schedule service. If it's flashing, the problem is more serious and you may need a tow. Why is my Jeep's tire pressure light on when it's cold outside? Tire pressure drops about 1 to 2 PSI for every 10-degree drop in temperature, so the first cold morning often triggers the light. Fill the tires to the pressure on the driver's door label while the tires are cold. Why are some 4WD lights on my Wrangler yellow? On Wrangler and Gladiator models, the 4WD, 4WD Low, sway bar and axle lock lights are yellow indicators. They remind you an off-road system is engaged, not that something is broken. The separate "Service 4WD" light is the one that means there's a problem. Why do all the warning lights come on when I start my Jeep? That's a normal self-check. The lights should go out within a few seconds after the engine starts. If one stays on, or if a light like the airbag or check engine light never comes on at all during startup, have the vehicle inspected. Will a warning light reset itself? Some lights go out on their own once the cause is fixed, like tightening a loose gas cap or inflating a low tire. Others stay on until a technician repairs the problem and clears the code. Warning Light On? McCarthy CDJR Can Help When a light comes on and you're not sure what it means, our Jeep-certified technicians in Lee's Summit can find out fast. We use factory diagnostic equipment to read your Jeep's codes, explain what's going on in plain language and fix it with genuine Mopar parts. We work on every Jeep model, from classic Wranglers to the latest Grand Cherokee and Wagoneer. We're located at 1051 SE Oldham Parkway in Lee's Summit, just off US-50, and we serve Jeep owners from Blue Springs, Raymore, Independence, Belton and across the Kansas City metro. Schedule your service online or call us at (816) 441-5389. If a red light means your Jeep shouldn't be driven, call us first and we'll help you figure out the next step. Schedule Jeep Service

It happens to everyone. The "Oil Change Required" message pops up on your dash, you make a mental note to call the service department, and then life gets in the way. A week turns into a month, and suddenly you're wondering whether those extra miles are doing real damage. The short answer Driving a few hundred miles past your oil change is usually not a problem for a healthy engine. Driving 1,000 miles or more past due starts to cause real wear, and going several thousand miles over can lead to expensive engine damage. How much risk you're taking depends on your engine, how you drive and how much oil is actually left in the crankcase. In this guide, we'll walk through what "overdue" really means on today's Jeep, Ram, Dodge and Chrysler vehicles, how far past due is too far, the warning signs that your oil change can't wait another day, and what to do if you've already let it slide. Whether you commute on I-470 every morning, tow a boat to Lake of the Ozarks on weekends or mostly make short trips around Lee's Summit, you'll know exactly where you stand by the end. What "Overdue" Really Means on Today's Vehicles If you learned to drive when the rule was "change your oil every 3,000 miles," modern maintenance can feel confusing. Engines, oil and the computers that monitor them have all come a long way, and the 3,000-mile rule no longer applies to most vehicles on the road today. How the oil life monitor works Most Jeep, Ram, Dodge and Chrysler models use an electronic oil change indicator, often called an oil life monitor. Rather than counting miles alone, it estimates how quickly your oil is wearing out based on how the vehicle is actually driven. It considers factors such as: Engine revolutions and how hard the engine is working Engine and outside temperatures Time spent idling Short trips where the engine never fully warms up Towing and heavy loads The monitor counts down from 100%, and when it reaches 0%, you'll see a message like "Oil Change Required" on the instrument cluster. Depending on how you drive, the indicator may call for a change as early as about 3,500 miles or as late as 10,000 miles. Jeep's maintenance schedules also set a hard limit: change synthetic oil no later than 10,000 miles or 12 months, whichever comes first, even if the monitor hasn't reached 0%. Your owner's manual lists the exact limits for your vehicle and engine. Why your interval might differ from your neighbor's Two people can buy the same Jeep Grand Cherokee on the same day and need oil changes thousands of miles apart. A driver who spends 40 minutes a day cruising the highway puts relatively easy miles on the oil. A driver who makes five-minute trips to school and the grocery store, idles in drive-thru lines and sits in rush-hour traffic on Highway 50 is putting the oil through what engineers call "severe service," and the monitor will ask for a change much sooner. That's why the monitor, not a sticker on the windshield or a rule of thumb, is the best guide for when your oil is actually due. Don't forget the calendar Oil breaks down with time as well as miles. Moisture and fuel vapors collect in the oil even when the vehicle sits, and additives slowly lose their strength. If you drive very little, such as a weekend Wrangler or a second vehicle, you'll still want to change the oil at least once a year. How Far Past Due Is Too Far? There's no single number that applies to every engine, and no automaker publishes a "safe overdue" mileage. The guide below is a practical rule of thumb for thinking about risk, not a factory specification. It assumes a healthy engine with the oil level in the normal range. If your oil is low, treat every range as more serious. How far past due Risk level What to do 0 to 500 miles Low Schedule service in the next week or two. 500 to 1,000 miles Moderate Book an appointment this week and avoid towing or long, hard drives until then. 1,000 to 3,000 miles High Get it changed as soon as possible. Check the oil level today. More than 3,000 miles Very high Stop putting off service. Check the level now and drive gently until it's changed. Why the first few hundred miles are usually fine The oil life monitor builds in a margin of safety. When it says 0%, the oil hasn't suddenly stopped working; it has reached the point where engineers want it replaced before protection starts to fall off. A short delay to fit an appointment into your schedule won't typically hurt anything. Why risk climbs quickly after that Past that margin, oil's protective additives are largely used up. The oil thins out, carries more dirt and acids, and does a worse job keeping metal parts apart. Every additional mile adds wear that you can't undo with the next oil change. The damage isn't usually sudden; it builds quietly until it shows up as noise, oil consumption or a failed part. Low oil changes everything Many engines use a little oil between changes, which is normal. But an engine that's a quart or two low and also overdue is running with less oil doing more work. That combination is what leads to the worst damage, which is why checking the level is the first thing to do whenever you realize you're overdue. What Old Oil Does Inside Your Engine It helps to understand what motor oil actually does, because that explains why skipping a change matters. Oil has four main jobs: Lubrication: it keeps a thin film between moving metal parts like bearings, pistons and camshafts so they don't grind against each other. Cooling: it carries heat away from the hottest parts of the engine. Cleaning: detergents in the oil pick up soot, dirt and tiny metal particles and hold them until the filter catches them. Protection: additives neutralize acids and help prevent rust and corrosion. As oil ages, it gets worse at all four. The breakdown process Heat is oil's biggest enemy. Every time your engine runs, the oil cycles through temperatures well above the boiling point of water. Over thousands of miles, that heat breaks down the oil's molecules and burns through its additives. At the same time, small amounts of fuel, moisture and combustion byproducts slip past the piston rings and mix into the oil. The result is oil that's thinner when hot, thicker and sludgier when cold, more acidic and full of particles the filter can no longer hold. Meanwhile, the oil filter itself is filling up. Once it's saturated, a bypass valve can open to keep oil flowing, which means dirty oil circulates without being filtered. What that does to your engine over time Sludge: thick deposits form in the oil pan, valve covers and narrow oil passages. Sludge can block the oil pickup and starve parts of oil. Faster wear: bearings, cylinder walls, timing chains and camshafts wear faster when the oil film is weak or gritty. Timing chain and variable valve timing problems: many modern engines use oil pressure to adjust valve timing. Dirty oil can clog the small screens and solenoids that control it, leading to rough running and warning lights. Turbocharger damage: turbos spin at extremely high speeds and rely on clean oil for both lubrication and cooling. Overheating: degraded oil carries less heat away, which adds stress to the whole engine. Engine failure: in the worst cases, a starved bearing can spin or seize, and the repair can cost thousands of dollars or require a replacement engine. Warranty matters, too If your vehicle is still under a factory or extended warranty, following the maintenance schedule matters. Engine damage linked to missed oil changes may not be covered. Keep your receipts, whether you service with us or elsewhere, so you have a record if you ever need it. 8 Warning Signs Your Oil Change Can't Wait Your vehicle often tells you when the oil has gone past its useful life. If you notice any of these, move your oil change to the top of the list. 1. The oil pressure warning light comes on This is the most important one. The red oil pressure light, shaped like an old-fashioned oil can, means the engine isn't getting enough oil pressure. It's not the same as the oil change reminder. If it comes on while driving, pull over as soon as it's safe, turn off the engine and check the oil level. Driving with low oil pressure can destroy an engine in minutes. 2. The check engine light appears Dirty or low oil can trigger codes related to variable valve timing or engine performance. A check engine light has many possible causes, but if you're also overdue on oil, mention it when you book service. 3. The engine sounds louder than usual A healthy engine has a smooth, even sound. When oil is thin or low, you may hear ticking, tapping or knocking, especially right after a cold start before oil has fully circulated. Any new noise is worth getting checked. 4. The oil looks dark and gritty Fresh oil is amber and see-through. Oil darkens naturally as it works, so color alone doesn't tell the whole story, but oil that's jet black, thick or gritty between your fingers is overdue. 5. The level is low on the dipstick If the oil is at or below the "add" mark, top it off with the oil type listed in your owner's manual right away, then schedule a change. Frequent low readings can point to a leak or an engine burning oil. 6. You smell oil or see smoke A burning oil smell inside the cabin can mean oil is leaking onto hot exhaust parts. Blue-gray smoke from the tailpipe can mean oil is getting into the combustion chamber. Either one needs a professional look. 7. Your fuel economy drops Worn-out oil creates more friction, so the engine has to work harder. If you're suddenly filling up more often with no change in your driving, old oil could be part of the reason. 8. The engine feels sluggish or runs rough Hesitation, rough idling or less power than usual can all come from oil-related issues, especially in engines that rely on oil pressure for valve timing. How to Check Your Oil in 5 Minutes Checking your oil is one of the easiest things you can do to protect your engine, and it's worth doing once a month and before any long road trip. Park on level ground. A slope will give you a false reading. Turn the engine off and wait. Give it five to ten minutes so the oil drains back into the pan. If the engine is hot, be careful around the exhaust and radiator. Find the dipstick. It usually has a bright yellow or orange handle and is often marked with an oil can symbol. Pull it out and wipe it clean with a paper towel or rag. Push it all the way back in, then pull it out again. Read the level. The oil should sit between the two marks, often labeled "min" and "max" or shown as a crosshatched area. Look at the oil. Note the color and feel. Amber to light brown is good; black, thick or gritty means it's time. Top off if needed. Add a little oil at a time through the oil fill cap on top of the engine, using the type and viscosity listed in your owner's manual, then recheck. Don't overfill. What if my vehicle doesn't have a dipstick? Some newer vehicles check oil electronically and display the level in a vehicle information menu instead of using a traditional dipstick. Your owner's manual will show you where to find it. If you're not sure, stop by our service drive and we'll show you in a couple of minutes. What should I look for besides the level? Milky or foamy oil can mean coolant is mixing with the oil, which needs immediate attention. A strong fuel smell can mean fuel is diluting the oil. Metal flakes or a shiny sparkle can be a sign of internal wear. If you see any of these, schedule an inspection rather than just an oil change. When an Overdue Oil Change Is Riskier Than Usual Some engines and driving habits are harder on oil than others. If any of these describe you, give yourself less wiggle room past the due date. Turbocharged engines Many newer Jeep, Ram, Dodge and Chrysler models use turbocharged engines, such as the twin-turbo Hurricane inline-six in the Ram 1500 and Grand Wagoneer, the new Hurricane 4 turbo in the 2026 Grand Cherokee and the 2.0-liter turbo four-cylinder in the Compass and Wrangler. A turbo's shaft spins extremely fast and runs very hot, and it depends on clean oil to stay lubricated and cool. Old, broken-down oil can cause deposits that shorten a turbo's life. HEMI V8 engines The HEMI V8 is built tough, but it still relies on clean oil. Many HEMI engines use the Multi-Displacement System, which shuts off four cylinders when cruising to save fuel. It works by using oil pressure to unlock special lifters on those cylinders, so it depends on steady oil pressure and good oil. Poor oil quality, the wrong viscosity, low oil and missed changes can all contribute to lifter problems, so staying on schedule matters. Diesel trucks If you drive a Ram Heavy Duty with the Cummins turbo diesel, your engine produces more soot than a gas engine, and that soot ends up in the oil. Diesel oil changes are larger and pricier, which makes them tempting to put off, but they protect one of the most expensive engines you'll ever own. Follow the oil change indicator and your owner's manual closely. Towing and hauling Pulling a camper, boat or work trailer makes the engine work harder and run hotter, especially on hills or in summer heat. If you tow regularly, your oil wears out faster, and the monitor will usually account for that. Avoid towing at all when you know you're overdue. Lots of short trips Short trips are surprisingly hard on oil. Combustion gases leak past the piston rings and carry water, soot and gasoline into the oil. If the engine never fully warms up, that moisture and fuel don't evaporate. Over time that can create sludge, even if your total miles are low. Cold Kansas City winters Winter brings two problems. First, oil thickens in the cold, so it takes a moment longer to reach every part at startup, and old oil makes that worse. Second, cold weather means more short, cool-running trips. If your oil change is due anytime from November through February, don't stretch it. A fresh oil change before the first hard freeze is one of the best things you can do for your engine this winter. 4 Oil Change Myths, Busted Myth 1: "You still need to change your oil every 3,000 miles." For most modern vehicles, that's no longer true. Today's engines and oils are designed for longer intervals, and the oil life monitor tailors the timing to how you drive. Changing it more often won't hurt your engine, but it may not be necessary. Following the monitor and your owner's manual is the smart approach. Myth 2: "If the oil level is fine, I don't need a change." A full dipstick only tells you there's enough oil, not that it's still doing its job. Old oil can be at the right level and still be broken down, acidic and full of contaminants. Myth 3: "Topping it off is just as good as changing it." Adding oil helps when the level is low, but it doesn't remove the dirt and degraded oil already in the engine, and it doesn't replace a clogged filter. Think of it as buying time, not solving the problem. Myth 4: "Synthetic oil lasts forever." Full synthetic oil resists heat and breakdown better than conventional oil, which is why many modern engines require it. But it still collects contaminants and wears out. Synthetic is better oil, not permanent oil. Already Way Overdue? Here's What to Do If you just realized you're thousands of miles past due, don't panic. Most engines will be fine once they get fresh oil, especially if the level never got low. Here's the plan: Check the oil level today. If it's low, add the correct oil to bring it up to the full mark. Drive gently until your appointment. Skip towing, hard acceleration and long highway runs at high speed. Book service as soon as you can. Tell the service advisor how far overdue you are so the technician knows to look for signs of sludge or wear. Listen and watch. If the oil pressure light comes on or you hear knocking, stop driving and call for help. Ask about your next interval. If the oil came out very dirty, the technician may suggest a shorter interval next time to help clean out deposits. Reset your habits. Set a phone reminder for your next service, or ask us to send you an email or text when it's due. One overdue oil change is rarely the end of an engine. A habit of stretching every change is what adds up to expensive repairs. Frequently Asked Questions Is it safe to drive with the oil change light on? For a short time, yes. The oil change reminder means your oil has reached the end of its recommended life, not that the engine is in immediate danger. Schedule service within a week or two. The red oil pressure warning light is different: if that comes on, pull over and turn off the engine. How many miles can I go after the oil change light comes on? Most healthy engines can handle a few hundred extra miles without harm. Past about 1,000 miles, wear increases, and the risk keeps climbing from there. If you tow, drive in extreme heat or cold, or have a turbocharged or diesel engine, aim to get it done sooner. What happens if I go 10,000 miles past my oil change? At that point, the oil has likely broken down badly and the filter may be clogged. Some engines survive it, but the risk of sludge, worn bearings and turbo or timing system problems is high. Check the level, drive gently and get it changed right away. Can an overdue oil change cause a check engine light? Yes. Dirty or low oil can affect systems like variable valve timing that rely on oil pressure, which can set a check engine light. A technician can read the code to confirm the cause. Do I need to reset the oil life monitor after a change? Yes. The monitor needs to be reset after every oil change so it can start counting again. Our technicians reset it as part of service. If you change your own oil, the steps are in your owner's manual, and we have a guide for resetting the oil change light on a 2026 Jeep Compass. Does it matter what oil I use? Yes. Modern engines are built around a specific oil type and viscosity, such as 0W-20 or 5W-30, and many require full synthetic. Using the wrong oil can affect protection, fuel economy and even warranty coverage. Your owner's manual and the oil fill cap list what your engine needs. Get Your Oil Change at McCarthy CDJR in Lee's Summit If your oil change is due, or overdue, the service team at McCarthy Jeep Ram Chrysler Dodge makes it easy to get caught up. Our factory-trained technicians work on Jeep, Ram, Dodge and Chrysler vehicles every day, so they know exactly which oil and filter your engine needs, whether it's a Pentastar V6, a HEMI V8, a Hurricane twin-turbo or a Cummins diesel. Every oil change includes more than fresh oil. We'll replace the filter with a genuine Mopar part, top off your fluids, check your tire pressure, look over your belts, hoses and brakes, and reset your oil life monitor so you know exactly when your next service is due. If we spot anything that needs attention, we'll explain it in plain language and let you decide what to do. We're conveniently located at 1051 SE Oldham Parkway in Lee's Summit, just off US-50, and we serve drivers from Blue Springs, Raymore, Independence, Belton and across the Kansas City metro. Schedule your service online in about a minute or call us at (816) 441-5389. Be sure to check our current service specials before you come in. Schedule Your Oil Change

Shopping for a midsize SUV often means comparing some of the most popular vehicles on the road today. Two models that frequently appear on shoppers' short lists are the 2026 Jeep Grand Cherokee and the Toyota Highlander. Both offer comfortable interiors, advanced technology, impressive safety features, and family-friendly versatility, but they are designed with different priorities in mind. The 2026 Jeep Grand Cherokee continues to build on its reputation for capability, premium comfort, and available four-wheel-drive confidence. The Toyota Highlander remains a strong choice for families seeking efficiency, practicality, and everyday usability. If you're trying to determine which SUV best fits your lifestyle, this comparison highlights the key differences between the Jeep Grand Cherokee and Toyota Highlander. Jeep Grand Cherokee vs Toyota Highlander at a Glance Category 2026 Jeep Grand Cherokee Toyota Highlander Capability Strong advantage Moderate Off-Road Confidence Excellent Limited Luxury Features Available premium trims Available premium trims Hybrid Availability Available on select models Available Family Friendliness Excellent Excellent Towing Capability Advantage Good Performance and Capability One of the biggest differences between these SUVs is their overall personality. The Jeep Grand Cherokee is designed to deliver a more capable and confident driving experience, especially for drivers who frequently encounter challenging road conditions or enjoy outdoor adventures. Available four-wheel-drive systems, Jeep's long-standing off-road heritage, and multiple drive modes help the Grand Cherokee stand apart from many competitors in the midsize SUV segment. The Highlander, meanwhile, focuses more heavily on smooth on-road driving, family transportation, and efficiency. While available all-wheel drive improves traction, it is not designed with the same level of off-road capability as the Grand Cherokee. Capability Comparison Best For Grand Cherokee Highlander Camping Trips ✓ Off-Road Adventures ✓ Daily Commuting ✓ ✓ Road Trips ✓ ✓ Fuel Efficiency Focus ✓ Interior Comfort and Passenger Space Both SUVs offer comfortable interiors designed for families, commuters, and road trip enthusiasts. The Grand Cherokee places a strong emphasis on upscale materials, premium design, and available luxury features. Higher trims offer features such as premium leather seating, advanced digital displays, premium audio systems, and sophisticated interior finishes that rival some luxury SUVs. The Highlander focuses on maximizing family practicality, offering flexible seating arrangements and a comfortable cabin designed for everyday transportation. Technology Features Modern SUV shoppers expect advanced technology, and both vehicles deliver a strong suite of connectivity and convenience features. Technology Feature Grand Cherokee Highlander Apple CarPlay® Available Available Android Auto™ Available Available Wireless Connectivity Available Available Premium Audio Available Available Digital Driver Displays Available Available The Grand Cherokee often appeals to buyers seeking a more premium technology experience, while the Highlander focuses on intuitive family-friendly functionality. Safety and Driver Assistance Features Safety remains a priority for both manufacturers. Depending on trim level, both vehicles offer advanced driver-assistance technologies such as adaptive cruise control, blind spot monitoring, lane departure warning, and automatic emergency braking. Both SUVs provide strong confidence for family transportation, daily commuting, and long-distance travel. Which SUV Is Better for Families? The answer largely depends on your priorities. Choose the Jeep Grand Cherokee if: You want greater capability, available four-wheel-drive systems, stronger towing confidence, premium interior options, and an SUV that can handle both daily driving and outdoor adventures. Choose the Toyota Highlander if: Fuel efficiency and everyday family transportation are your primary concerns, particularly if you're considering a hybrid model. For many Kansas City-area drivers, the Grand Cherokee's balance of comfort, capability, technology, and versatility makes it an attractive option for families who want more than just a commuter SUV. Explore the Jeep Grand Cherokee at McCarthy CDJR If you're comparing the Jeep Grand Cherokee and Toyota Highlander, the best way to determine which SUV fits your lifestyle is to experience them firsthand. The Jeep Grand Cherokee continues to stand out with its blend of premium comfort, advanced technology, impressive capability, and legendary Jeep confidence. Visit McCarthy CDJR in Lee's Summit to explore available Jeep Grand Cherokee models, compare trim levels, and schedule a test drive. Our team is here to help you find the SUV that fits your family's needs today and for years to come, contact us to schedule a test drive or come by the dealership today! Frequently Asked Questions Which is better, the Jeep Grand Cherokee or Toyota Highlander? The answer depends on your priorities. The Grand Cherokee generally appeals to drivers seeking capability, towing confidence, premium features, and available off-road performance, while the Highlander is often chosen for fuel efficiency and family-focused practicality. Is the Jeep Grand Cherokee good for families? Yes. The Jeep Grand Cherokee offers comfortable seating, advanced safety features, modern technology, and versatile cargo space that make it a strong family SUV. Does the Jeep Grand Cherokee have better towing capability than the Toyota Highlander? Depending on configuration, the Jeep Grand Cherokee is generally known for strong towing capability and is often preferred by drivers who tow trailers, boats, or recreational equipment. Which SUV is better for off-road driving? The Jeep Grand Cherokee offers available four-wheel-drive systems and off-road-focused engineering that make it a stronger choice for drivers who plan to venture beyond paved roads. Should I choose the Jeep Grand Cherokee or Toyota Highlander? Drivers looking for capability, premium amenities, towing confidence, and Jeep’s legendary reputation often gravitate toward the Grand Cherokee, while buyers prioritizing efficiency may prefer the Highlander.